Corridor light radar switch module Radar induction light 99% of the property company's choice, as the name suggests, the radar induction light switch is replaced by the radar induction switch, also known as the microwave induction switch. Corridor light radar switch module based on Doppler effect, using advanced plane antenna, can effectively suppress the interference of high harmonics and other clutter, high sensitivity, strong reliability, safe and convenient, intelligent energy saving is 99% intelligent building and modern property management choice. Micro power consumption, complete functions, can bring a variety of lamps.
Function and Features of corridor light radar switch module:
1. Intelligent sensing: When someone enters the detection range of this product, the microwave detector will light up, and when the person leaves the detection range, the light will automatically go out. It can automatically recognize day and night.
2. Intelligent delay: The switch automatically delays one cycle after detecting each activity of the human body, and the delay time of a subsequent human activity is the starting point.
3. Working mode: After the induction switch of the corridor light radar switch module is connected, during the delay period, if there is human activity, the switch will continue to be connected until people leave and delay.
4. Photosensitive control: according to the external light intensity, control whether the switch works, in order to achieve energy saving effect.
5 Compared with infrared products: corridor light radar switch module distance is far, wide Angle, no dead zone, can penetrate glass and sheet, according to different power through different thickness of the wall, is not affected by the environment, temperature, dust, 37 degrees induction distance will not be shortened. Radar switch is an ideal replacement for infrared switch.
6. Scope of application of corridor light radar switch module: corridor, corridor, toilet, basement, garage, warehouse, monitoring and other energy-saving automatic lighting places.
Note:
1. Do not install with power on and do not short-circuit the load.
2. Do not use overload power.
3. When the wall thickness is less than 10 cm, the switch may sense the partition wall.
4. In the sensing area, there shall be no obstacles or objects in constant motion that affect its detection.
5. Do not use turbulent objects as the installation base.
